1 6

PowerResinCLone

OPAQUE

OPAQUE

€338,80 EUR
€338,80 EUR
Sale Sold out
Tax included.
Weight

PowerResins OPAQUE, for DLP and LCD 3D printers, delivers flawless printing in jewelry production. 100% ash-free formula ensures clean, residue-free casting.

 

  • Smooth surface quality
  • Shrinkage rate is %3
  • Suitable for 365nm, 385nm and 405nm wavelenght 3D printers
  • Find here printing parameters for DLP and LCD printers
View full details

Product Description

Product Features

  • Smooth surface quality
  • Shrinkage rate is %3
  • Suitable for 365nm, 385nm and 405nm wavelenght 3D printers
  • Find here(link to KB printing parameters) printing parameters for DLP and LCD printers

Material Properties

Material PropertiesValueStandard
Tensile strength9.63 MPaASTM D638
Flexural strength11.43 MPaASTM D790-02
Flexural modulus258.6 MPaASTM D790-02
Shore Hardness60.8ASTM D2240
Density1.08 g/cm3 at 23oCASTM D1475
Viscosity480 - 500 mPa.s at 23oCDIN 53211-4
ColorOpaque Green

Post Process

1- Washing

After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again.

3- Part Removal

Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

4- No need post UV curing! Enjoy your casting.

Storage Conditions

Store the PowerResins Opaque bottle in dark and moisture free place at room temperature (20-24 °C). Do not forget shaking the resin well before use.

  • ACCURATE

    Provides accurate printing details with a smooth surface.

  • SAFE & NOT SMELLY

    Safe to handle. Does not contain monomers.

  • EASY TO CAST

    Easily cast your jewelry models with Optima prestige, Omnicast, Ransom & Randolph.

  • NO NEED POST UV CURING

    After printing simply wash and dry yet ready to be casted.