1 2

PowerResinEu

BURN2

BURN2

€314,60 EUR
€314,60 EUR
Sale Sold out
Tax included.
Weight
%100 Ash-Free Rapid Burnout Castable Resin

PowerResins BURN 2 resin is reformulated as %100 ash-free castable resin for excellent quality speed burnout for dental direct metal partial frameworks, chrome-cobalt casting as well as excellent for lithium disilicate press applications for inlay, onlay and overlay, laminate and veneer models. You will not face with any investment cracks or expansion during your casting process and can be used with any dental investment/gypsoms brand.

  • 100% ash-free burnout for dental fast burnout chrome cobalt casting
  • No investment cracks or expansion
  • Lithium disilicate inlay, onlay, overlay, laminate and veneer models
  • Produced under ISO standards 13485:2016
  • Find here validated DLP, LCD 3D printers list

If you're using a third-party printer specifically LCD technology please make sure to add PRIMER product to your order to avoid adhesion issues and print failures. Furthermore, if your 3D printer is without a built-in heater, we recommend preheating the resin to 37°C for optimal results.

Disclaimer: European customers, please add a valid VAT number at checkout. Learn how to add VAT 

For technical inquiries, contact: support@3bfab.com 

View full details

Product Description

Product Features

  • 100% ash-free burnout for dental fast burnout chrome cobalt casting
  • No investment cracks or expansion
  • Lithium disilicate inlay, onlay, overlay, laminate and veneer models
  • Produced under ISO standarts 13485:2016
  • Find here validated DLP, LCD 3D printers list

Material Properties

Material PropertiesValueStandard
Flexural strength20.7 MpaASTM D790-02
Flexural modulus472 MpaASTM D790-02
Tensile Strength14.4 MpaASTM D638
Density1.08 g/cm3 at 23 CASTM D1475
Shore Hardness70.5 DASTM D2240
Viscosity490 - 510 mPa.s at 23 CDIN 53211-4
ColorGreen

Post Process

1- Washing

After the printing is completed, wash the part as attached to the building plate with ethyl alcohol (>%90) or isopropyl alcohol (>%90) for 5 minutes. Make sure that alcohol covers the part entirely when washing. Do not over-wash, it may cause deterioration in dimensions of the part.

2- Drying

Use air-compressor to dry the washed part. Make sure that the part is dry and uncured resin is cleaned up completely. If still uncured resin left on the part, wash it with fresh alcohol and dry again. 3- Part Removal

Remove the printed part from the building plate using a scraping tool. Be very careful not to damage your hand and the model.

4- No need post UV curing! Enjoy your casting.

Storage Conditions

Store the PowerResins Temp bottle in dark and moisture free place at room temperature (20-24 °C).

Do not forget shaking the resin well before use.

If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.

  • 100% ASH-FREE CASTABLE

    Specially made for direct casting. Evaporates with heat leaving no ash.

  • NO NEED POST CURING

    After printing wash and dry yet it is ready to proceed rapid dental casting.

  • E-MAX PRESS APPLICATIONS

    Empress Lithium disilicate inlay, onlay, overlay, laminate and veneer models.

  • PERFECT FITTING

    High accuracy and perfect fitting margin lines for your castable applications